How To Reset Linksys Password

These days, the most preferred way to connect to the internet is through the router, especially at the workplace where a large number of people want to access the internet. The most preferred that a large number of people prefer is Linksys. It is the primary maker of routers used by a number of the current internet service providers. If you too have a Linksys Wi-Fi router service up running in your place of business or home, then it’s important to secure the connection. If you feel that your Linksys login has been compromised or you have forgotten your password or you simply feel that too many people are using your router service but you want to give access to only a few, then you can do one of two things: Either change the username and password on the router or reset it to its default settings.
Change Linksys Login Username and Password
For that, you need to Log in to your Linksys router. This is to be done through the web interface that takes you to the official website of the Linksys router service. The web address is http://192.168.1.1. Go to the browser and type the following address bar. If you going to log in for the first time, then you have to use the Linksys default username and the Linksys default password. The default “Username” is blank and Linksys default password is “admin”.
After you gain access to the interface, go to the “Administration” tab and the “Management” subpage, where you see the username and password you are currently using. You can change the username and password to something which suits you. It is advisable to go for the username and password which is easy for you to remember but difficult for others to figure out. When you are finished, click on the button “Save Settings.” Now, you have successfully changed the username and password and only those who know the username and password can access the internet through the Linksys router. Now, you have set the username and password according to you. But if you feel that your Linksys login has been passed on to a lot of people or you have forgotten your password or you simply feel that too many people are using your router service but you want to give access to only a few, then you have to reset the Linksys password. For that, you have to reset the Linksys router and take it back to default settings. This is not the same thing as a reboot because no settings are changed during a reboot. Reset is much more than that. When you reset a router you take off all the current settings and return every one of them back to factory defaults settings.
However, a factory reset is a big step and should not be done frequently for small things. It is advisable to go for other methods of troubleshooting before you decide to reset. Like, you can perform a power cycle on your router if the issue is about connection an internet. To do this, unplug the power cord of your router from the power outlet for 30 seconds then plug it back in. This is an easy and quick way to get rid of the issues on your router. You can also try to unplug the power cord, Internet, and Ethernet cables from its ports and plug it back. However, if the problem is with the username and password settings, then you have to go for the reset. Now, if you are prepared to reset your router, you need to locate the reset button on the outside of the router itself. On some routers, the reset button is on the back, while on others, it is on the bottom.
Mostly it is found on the back panel next to the power button. It is a small button on the behind of the router so that it does not get pressed accidentally. Before you begin with the reset, make sure that the Power LED of the router is blinking when you press the Reset button. This indicates that the router is being reset properly. To press the reset button, you need a paper clip, pen, or another small sharp-pointed object as told above it is a very tiny button to avoid accidental resets, so it won’t get pressed easily with the fingertip. On some routers, the reset button is on the back, while on others, it is on the bottom Insert the paper clip and press and hold the button for about 30 seconds. As you hold the reset button, a light should start to blink continuously. Keep holding the reset button for another 15 to 20 seconds until that blinking light goes off. When the light goes off leave the reset button and unplugs the router from the wall. After pressing the Reset button, unplug and re-plug the router’s power adapter. Wait for another 30 seconds before plugging it back in.

Remember, is some routers the Power LED light of the router will keep on blinking for a few seconds even after the reset has been performed this is because it is still trying to stabilize. However, if the Power light still does not stop blinking after a minute, then power cycle the router. Resetting the router using the web-based setup page
You have to know how to access the router’s web-based setup if you want to configure advanced settings like setting up a wireless security for your network or change the settings like username and password.
Before beginning with it makes sure you have a stable and running internet connection and that should not be any other Linksys routers in your area or If you are using a wireless device to access the web-based setup page, make sure that your device is connected to your Linksys router’s Wi-Fi. If you are connecting the router to the wired internet connection then do it the first turn off your modem, plug the router into the modem. Turn the modem back on again.

You have to know how to access the router’s web-based setup if you want to configure advanced settings like setting up a wireless security for your network or change the settings like username and password.

Before beginning with it makes sure you have a stable and running internet connection and that should not be any other Linksys routers in your area or If you are using a wireless device to access the web-based setup page, make sure that your device is connected to your Linksys router’s Wi-Fi.

Accessing the web-based setup page
Launch a web browser and enter “192.168.1.1” in the Address bar then press Enter. If the IP address does not work or if it has been changed, check your Linksys router’s IP address.
Enter your login credentials or default login credentials in the fields provided. At this point, all your previous settings would be gone and you can now reconfigure the wireless network and set up a new set of login details.
Or to do it in the simpler way without getting I all this trouble of reset, you can also perform a factory reset via the web interface. Locate “Factory Defaults” under the “Administration” tab. Click on it to restore the factory settings.